16 Zones Repeater panel

The Repeater is compatible with all RP1016 Series control panels Repeaters are available with 16 zones with 24V powered (DC). Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.

A mixture of Repeaters or Ancillary boards up to a maximum of 4 of each type can be connected to a control panel and each is allocated an address from 1 to 4 using a binary coded DIP switch.The total length of the data cable from the main panel to the last repeater must not exceed 1200 meters.

* Power supply: 16VDC to 30VDC

* Current of power: Standby current: ≤15mA, Alarm current: ≤75mA

* Relay contact capacity: 2A@24VDC

* Buzzer level: 80dB@1m.

* Protection level: IP55

* Communication mode:RS485 (Wires: RVSP type,1.0 m2to 2.0m2)

* Dimension of enclosure: 200mm(W)x91mm(H)x45mm(D)

* Material of enclosure:ABS, White

* Weight: 350g

* Hole of enter wires: 1/2 inch(12mm)